Bambu Lab Filament Track Switch 3D Printer The filament cutter prevents clogging

The filament cutter prevents clogging by cutting the filament

(The instructions below will show you how to remove prints without damaging the coating)

you should read our dedicated article and material table about preparing print surfaces

1g/cm³ Viscosity 250 Flexural strength 64~83 Hardness 82HD Felxural modulus 2040~2600 MPa Tensile strength 42~57 MPa Bottom exposure time 20~40 Normal exposure time 1

Designed for High-Speed Printing

Bambu Lab Filament Track Switch 3D Printer The filament cutter prevents cloggingBambu Lab Filament Track Switch The Bambu Lab Filament Track Switch is a filament switching module for the X2D, eliminating the fixed binding between AMS units and nozzles. Once installed, any filament in any connected AMS can be freely routed to either the left or right nozzleas assigned by the slicer. Combined with Dynamic Mapping support in Bambu Studio, the slicer can intelligently reallocate filaments between nozzles layer by layer to minimize